Tornio a fantina mobile passaggio barra diam. 32 mm con Y-2
Machine specification
MODEL | GO-326 |
---|
Machining capacity | Main spindle | Bar stock diameter | Ø8~32 mm |
| | Machining length | 320mm (Direct- drive guide bushing) |
| | | 115mm (Mechanical-drive rotary guide bushing) |
| | | 70mm (Guide bushing-less) |
| | Drilling | Ø12 mm |
| | Tapping | M10 |
| | Deep hole drilling | Ø10mm |
| Back spindle | Chuck diameter | Ø32 mm |
| | Drilling | Ø10 mm |
| | Tapping | M8 |
| Tool spindle | Drilling / tapping (Left cross tool) | Ø8mm / M6 |
| | Drilling / tapping (Right cross tool) | Ø8 mm / M6 |
| | Drilling / tapping (Back tool) | Ø8 mm / M6 |
| | Slitting saw | Ø45 mm (Right cross tool T04) |
Speed | Main spindle | | 200~8,000 min-1 |
| Back spindle | | 200~8,000 min-1 |
| Direct-drive rotary guide bushing | | 200~8,000 min-1 |
| Tool spindle | | 200~6,000 min-1 |
TOOL SIZE |
OD tool shank | 16×16×100 mm |
Boring tool shank (For face/back ID tool or back tool post) | Ø25 mm |
Chuck for left cross tools | ER16 × 3 + ER20 × 1 |
Chuck for right cross tools | ER16 |
Chuck for back live tools | ER16 |
Chuck for back fixed tools | ER16 |
Chuck for deep hole drill | ER16 |
Tool position No. (Max. mountable tool No.): 29 (36) |
Left OD turn tool post | 5 |
Right OD turn tool post | 2 (OP.: 7) |
Front/back ID tool post (one-body) | 5 |
Back tool post | Live x 4 + Fixed x 4 |
Left cross tool post | 4 |
Right cross live tool post | 3 |
Face deep drill | 2 |
MOTOR |
Main spindle | 3.7 / 7.5 KW (Rated / 10%) |
Back spindle | 2.2 / 3.7 KW (Rated / 10 min.) |
Left cross tool | 1.0 KW |
Right cross tool | 1.0 KW |
Back tool | 1.0 KW |
Direct-drive rotary guide bushing | 2.2 / 3.7 KW (Rated / 10 min.) |
X1, Y1, Z1, X2, Z2 axis | 0.75 KW |
Y2 axis | 0.5 KW |
Coolant pump | 0.75 KW |
Lubricating pump | 0.011 KW |
Main spindle hydraulic pump | 0.75 KW |
AXIS TRAVEL |
X1 | 142mm |
Y1 | 348mm |
Z1 | 320mm (Direct-drive rotary guide bushing) |
X2 | 370mm |
Y2 | 68mm |
Z2 | 335mm |
OTHERS |
Weight | 3,500 KGS |
Rated power (Capacity) | 16.11 KW (22.5 KVA) |
Compressed air requirement | ≧4 KG/cm2 |
Air consumption | ≧100 NL/min |
Coolant tank capacity | 180L |
Machine dimensions (W×D×H) | 2,150 × 1,280 × 1,930 mm |
All specifications are subject to change without notice in advance.
GO-326 NC Specification
ITEM | GO-326 |
---|
Controller | FANUC 0i-TF |
No. of controlled axes | 8 (X1, Y1, Z1, C1, X2, Y2, Z2, C2) |
Spindle synchronization (S1, S2) | S1 – S2 (Main spindle – Back spindle) |
Z1, Z2 – axis synchronization | Yes |
Simultaneously controlled axes | Max. 4 axes/path |
Min. input increment | 0.001mm (Diametrical designation for X1, X2 axes) |
Min. command increment | 0.0005mm for X1, X2 axes; 0.001mm for other axes |
Max. programmable dimension | ±8 digits |
Rapid traverse rate | 32m/min (X1, Y1, Y2: 24m/min) |
Spindle / feed rate override | 0~150%, 10% increment |
Absolute / incremental command | X,Z,Y,C: Absolute U, W, V, H: Incremental |
Tool offset pairs | ±6 digits 200 pairs |
Display unit | 10.4” color LCD |
Display language | Chinese, English (standard) |
Part program storage length | 2 megabytes(S1+S2) |
Memory card I/O interface | Yes |
RS232C interface | Yes |
Rigid tapping (main/back spindle, cross tool spindle, back tool spindle | Yes |
Cut-off detection (Speed differential type) | Yes |
Tool life counter | Yes |
Tool spindle load monitor | Yes |
Machine standard accessories
ITEM |
---|
Door interlock |
Coolant flow switch |
Spindle cooling unit |
Work conveyor |
Standard tools |
Slide fixing blocks (For transit) |
Back spindle air purge |
Cross live drill air purge |
Coolant pump (1HP) |
Internal work light |
Manual pulse generator |
3-tiered warning lamp set |
Automatic power shut-off |
Bar feeder interface |
Main spindle brake for indexing |
Back spindle brake for indexing |
Work discharge system (Front & back discharge from back spindle) |
Guide bushing-less kit |
Options
ITEM |
---|
Guide bushing system | Motor direct- drive rotary guide bushing |
Mechanical- drive rotary guide bushing |
Tools for right cross tool post | Tool spindle |
Multiplied tool spindle |
Double face tool spindle |
Double face bevel drilling head (Adjustable angle) |
Thread whirling head |
Hobbing head |
Tools for back tool post | Tool spindle |
| Multiplied tool spindle |
| Adaptor for fixed tool |
| Back cross tool spindle |
| Back cross tool spindle – for saw |
Drill collet holders for fixed ID tool post | Single-face drill collet holder |
Double-face drill collet holder |
Coolant system | 40 bar / 70 bar |
Oil mist collector |
Chip conveyor and chip cart |
Main spindle adaptor (For non-rounded bar machining) |
Back spindle adaptor (For non-rounded bar machining) |
Small bore spindle sleeve (For reducing bar vibration) |
Automatic fire extinguisher |
Bar feeder |
Transformer |